Oven baffle is not symmetrical, fixings have been offset to ensure correct relocation.
3.15 OVEN LAMPS
To Replace Bulb
a) Undo lens cover fixings.
b) Undo bulb and replace.
c) Refit lens cover and ensure seal is not damaged.
To Replace Assembly
a) Remove LH outer side panel. (See Section 3.3)
b) Disconnect electrical connections.
c) Undo lens cover fixings.
d) Unclip housing from aperture.
Replace in reverse order.
3.16 CAPACITOR
a) Remove side panel.
b) Disconnect two capacitor leads at terminal block.
c) Undo fixing on capacitor base and remove unit.
d) Replace in reverse order.
3.17 ELEMENTS
a) Remove oven shelves and hangers.
b) Remove fixings and withdraw fan baffle.
c) Remove element plate and spacer bracket fixings. Pull elements forward until all
terminals are inside oven. This will also bring oven safety thermostat mounting plate forward.
d) Remove terminals taking care that wire end remains inside oven.
e) Remove element fixing screws.
f) Replace in reverse order. Take care to ensure that safety thermostat bracket is correctly
positioned.
Note
Oven baffle is not symmetrical, fixings have been offset to ensure correct relocation.
3.18 OVEN SAFETY THERMOSTAT
a) Safety thermostat can be reset by means of a thin tool under control compartment on
Right Hand side Section 3.1 & 3.2 above.
b) Press inset button on safety thermostat with thin tool to reset.
Warning
If safety thermostat has been activated and requires to be reset, this could be an indication
that additional parts are faulty
.
c) To remove safety thermostat, access can be gained by removing side panel as detailed in
Section 3.1 & 3.2 above, disconnect electrical leads and undo safety stat fixing nut under
base.
d) Replace in reverse order.
3.19 OVEN DOOR SEAL REPLACEMENT
Seal is fitted to front frame using countersunk screws.
When fitting new seal, place metal strip in position, pierce holes in seal and secure to holes
in front frame.
3.20 DOOR REMOVAL
a) Remove bottom front panel. (See Section 3.5)
b) Open doors through 90 degrees and remove fixings which secure door to bottom door
bracket.
