Falcon E401, Инструкция по установке, обслуживанию и эксплуатации

Страница: 12 / 20

4. Raise elements using tool provided (located
behind unit door). Rest elements on rear support bar.
5. With drain valve open, remove any traces of debris
from fry pot using a clean, damp cloth.
NOTE: Care should be taken not to damage sensors that
are secured to elements.
6. Remove strainer and microfilter, soak these in hot
soapy water.
7. Wash, rinse and dry removed items thoroughly.
Set these aside.
8. Close drain valve.
9. Fill fry pot 3/4 full with hot water.
10. Clean pan using a soft, clean cloth and hot soapy
water, rub away any stubborn staining with a
scouring pad and suitable detergent.
11. Open drain valve. Allow water to drain into bucket
below.
12. Use clean water to rinse fry pot and dry thoroughly.
13. Close drain valve.
14. Lower elements back into frypot and replace element
guard and baskets.
15. Remove oil bucket by pulling forward then upward.
16. Use handles and lift oil bucket to sink.
17. Pour away soiled water.
18. Thoroughly wash, rinse and dry oil bucket and oil
suction pipe.
19. Replace strainer and micro filter in oil bucket and
return oil bucket to cradle.
20. Fill fry pot with clean oil to -MIN- mark. Refer to
Section 6, Figure 6.
SECTION 9 - COOKING HINTS
Frying food involves many variables and the following
information is a guide only.
1. Ensure frying medium is clean and free of debris.
2. When topping up with oil, ensure oil level does not
exceed “MIN” line when cold and “MAX” line when hot.
3. Never overfill baskets with food product.
4. Filter oil as often as is practically possible. Remember,
this can be done whilst oil is below 180°C.
5. It is advised that a skimmer is used continuously
between frying batches of food to remove any floating
debris. Failure to do this may result in the oil
becoming bitter to taste.
6. During quiet spells, it is recommended that thermostat
is turned down to a lower setting. This will conserve
energy in addition to extending expected oil life.
7. To ensure a good eating experience, fry food as close
to serving time as possible.
8. After serving and when fryer has been turned off,
replace lid to ensure that no foreign bodies can
contaminate frying medium.
12