9
ZWP 10
1
2
!
x3
3
1
I N / E X
2 3
4
2
PRIMARY SECONDARY
x1
4
1
I N / E X
Function is used for copying information about devices
from basic controller (PRIMARY) to additional and
making it a SECONDARY controller. After performing
LEARN MODE on the controller, it is also necessary to
assign device to buttons of movement with the use of
ASSOCIATE function. It is better to perform LEARN
MODE function after adding all devices to basic
controller or after modification of the network.
Press once IN/EX button on basic remote control.
LEDs 1 and 4 will light up.
Within 1 0 sec. press three times IN/EX button on
additional remote control until lighting of LEDs 1
and 3.
Within 1 0 sec. on basic remote control LEDs 2
and 3 will light up and on additional 2 and 4 will
light up.
If the sequence does not occur, perform the
procedure from the beginning.
Note! With the use of an additional controller –
SECONDARY it is not possible to add device to
the network (INCLUDE) and remove device from
the network (EXCLUDE). However, it is possible
to perform ASSOCIATE and DELETE functions.
PRIMARY and SECONDARY function of the
controller can be performed by controllers from
different companies complying with Z-Wave
protocol.
To set the SECONDARY controller as
PRIMARY again, perform the DEFAULT
function.
Controller programming – basic functions
Adding another controller to the Z-Wave network – LEARN MODE
All manuals and user guides at all-guides.com
