8
ZWP 10
1
2
3
1
2
1
2 3 4
1
2 3
2 3 4
x1
x1
1
2 3
x 1
t<1s
I N / E X
x1
4
1
I N / E X
2 3
1
4
x1
Adding device only to buttons of movement - ASSOCIATE
Choose one of 5 channels on which the device is
to be assigned.
Within 1 ,5 sec. press once IN/EX button and once
button of movement of a given group to which
device is to be added. LEDs 1 ,2,3 will light up.
Within 1 0 sec. press P button on the device (see
device programming manual).
- Controller signals correct adding to group by
lighting of LEDs 2,3,4
- Controller signals incorrect adding by blinking of
LEDs 1 ,2,3 and the procedure should be
performed again from point 2.
If device has already been assigned to the controller
for buttons of movement (group) it can be added to
another group with the use of ASSOCIATE function.
Controller programming – basic functions
Adding device to the controller - INCLUDE
Adding device only to the controller's memory is
required if the user wants device to be in the Z-Wave
network and operated e.g. only by subordinate
controller (SECONDARY).
Press once IN/EX button on the controller.
LEDs 1 and 4 will light up.
Within 1 0 sec. press P button on the device until
the network status LED is off (see device
programming manual).
- Controller signals device correct adding by
lighting of LEDs 2 and 3.
- Controller signals device incorrect adding by
blinking of LEDs 1 and 4 and the procedure
should be performed again.
All manuals and user guides at all-guides.com
