30iE - v1111 - Installation/Operation - (16/48)
2.6.1 Inside pocket
- Go into incremental. ABS LED OFF.
- Preset the part zero or datum point (see section
"Datum point (part zero) to work
with tool compensation" on page 12
)
Go to point A. For that:
- Press these keystroke sequences.
- Compensate for the tool.
- Move both axes until the displays read X 0.000 and Y 0.000.
Go to point B. For that:
- Press these keystroke sequences.
- Compensate for the tool.
- Move X axis until the displays read X 0.000 and Y 0.000.
And so on for the remaining points of the figure using the icon keys shown.
A
B
[-30.56]
[-10.00]
X 0.000 Y 0.000
[-60.25]
[-0.000]
X 0.000 Y 0.000
