Fagor CNC8 070 Скачать руководство пользователя страница 31

Страница: 31 / 134

CNC8070

. 0402

RROR

SOLUTIONS

Page 25 of 128

Errors 1000-1999

1172

'Instruction not allowed while tool radius compensation is active'

DETECTION

During execution.

CAUSE

An attempt has been made to activate a function that is incompatible with tool radius
compensation.

SOLUTION

Cancel tool radius compensation to be able to activate the function.

1173

'The #UNLINK instruction must be programmed alone in the block'

DETECTION

During execution.

CAUSE

Only the block number of a label may be programmed in the same block as a "#"
instruction.

SOLUTION

Check the program.

1174

'#LINK: a new coupling (slaving) cannot be defined if a previous one is active'

DETECTION

During execution.

CAUSE

An attempt has been made to activate a second coupling (slaving ) without
deactivating the first one.

SOLUTION

Check the syntax of the instruction in the programming manual.

• If only the second coupling is desired, deactivate the first one with the #UNLINK

instruction before activating it.

• If both couplings are desired, deactivate the first one with the #UNLINK instruction

and then activate both at the same time with a single #LINK instruction.

1175

'#LINK: no coupling (slaving) has been defined'

DETECTION

During execution.

CAUSE

No axis coupling (slaving) has been defined with the #LINK command.

SOLUTION

Program the master and slave axes in the #LINK instruction.

1176

'#LINK: the master axis does not belong to the current axis configuration'

DETECTION

During execution.

CAUSE

The possible causes are:

• In the #LINK instruction, a master axis has been programmed that does not exist

or is not available in the channel.

• With the #LINK instruction, an attempt has been made to deactivate a coupling

whose master axis does not exist or is not available in the channel.

SOLUTION

The master and slave axes must exist in the channel that executes the instruction.

1177

'#LINK: the slave axis does not belong to the current axis configuration'

DETECTION

During execution.

CAUSE

The possible causes are:

• In the #LINK instruction, a slave axis has been programmed that does not exist

or is not available in the channel.

• With the #LINK instruction, an attempt has been made to deactivate a coupling

whose slave axis does not exist or is not available in the channel.

SOLUTION

The master and slave axes must exist in the channel that executes the instruction.

1178

'#LINK: the slave axis cannot be an axis of the main plane'

DETECTION

During execution.

CAUSE

An attempt has been made to activate a coupling with one of the main three axes as
slave.

SOLUTION

Check the program.

1179

'#LINK: The master and slave axes must be of the same type (AXISTYPE)'

DETECTION

During execution.

CAUSE

An attempt has been made to activate a coupling (slaving) where the master and slave
axes have different machine parameter AXISTYPE.

SOLUTION

The master and slave axes must have the same machine parameter AXISTYPE.

1180

'#LINK: The master and slave axes must have the same mode (AXISMODE)'

DETECTION

During execution.

CAUSE

An attempt has been made to activate a coupling (slaving) where the master and slave
axes have different machine parameter AXISMODE.

SOLUTION

The master and slave axes must have the same machine parameter AXISMODE.

Содержание CNC8 070







































































































































Результаты поиска

Содержание CNC8 070

Отзывы:

Бренды по названию

Популярные бренды

Fagor CNC8 070, Список кодов ошибок

Результаты поиска

Содержание CNC8 070

Отзывы:

Бренды по названию

Популярные бренды