Fagor CNC8 070, Список кодов ошибок

Страница: 119 / 134

CNC8070
R
EF
. 0402
E
RROR SOLUTIONS
Page 113 of 128
Errors 8000-8999
8225 'G function out of range'
DETECTION During editing and execution in MDI.
CAUSE The programmed G function does not exist.
SOLUTION Check the existing M functions in the programming manual.
8226 'H function out of range'
DETECTION During editing.
CAUSE The programmed H function does not exist.
SOLUTION Check the existing H functions in the programming manual.
8227 'Negative S allowed only with G63'
DETECTION During editing.
CAUSE A negative spindle speed has been programmed without having programmed
function G63 in the block.
SOLUTION The spindle speed must have a positive value. A negative value is only allowed when
programming G63 in the same block.
8228 'Tool number out of range'
DETECTION During editing.
CAUSE A negative tool number has been programmed.
SOLUTION The tool number must always be zero or positive.
8230 'F feedrate programmed twice'
DETECTION During editing.
CAUSE The F function has been programmed more than once in the same block.
SOLUTION Program the F function only once in the block.
8232 '"A" programmed twice'
DETECTION During editing.
CAUSE The A axis has been programmed more than once in the block.
SOLUTION Program the A axis only once in the block.
8233 '"B" programmed twice'
DETECTION During editing.
CAUSE The B axis has been programmed more than once in the block.
SOLUTION Program the B axis only once in the block.
8234 '"C" programmed twice'
DETECTION During editing.
CAUSE The C axis has been programmed more than once in the block.
SOLUTION Program the C axis only once in the block.
8235 '"U" programmed twice'
DETECTION During editing.
CAUSE The U axis has been programmed more than once in the block.
SOLUTION Program the U axis only once in the block.
8236 '"V" programmed twice'
DETECTION During editing.
CAUSE The V axis has been programmed more than once in the block.
SOLUTION Program the V axis only once in the block.
8237 '"W" programmed twice'
DETECTION During editing.
CAUSE The W axis has been programmed more than once in the block.
SOLUTION Program the W axis only once in the block.
8238 '"X" programmed twice'
DETECTION During editing.
CAUSE The X axis has been programmed more than once in the block.
SOLUTION Program the X axis only once in the block.