Fagor CNC 8070, Руководство по программированию

Страница: 236 / 556

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Programming manual
210
CNC 8070
10.
CANNED CYCLES
G
8
7.
Rect
angu
la
r pock
e
t can
ned cycl
e.
(S
OFT
V02.0
X
)
202
7. Rapid withdrawal (G0) to the center of the pocket, 1 mm off the
machined surface.
8. New milling surfaces until reaching the total depth of the pocket.
• Penetration, at the feedrate indicated in "F" up to a distance "B"
from the previous surface.
• Milling of the new surface following the steps indicated in points
5, 6 and 7.
9. Withdrawal to the starting plane (Zi) if function G98 is active or to
the reference plane (Z) if function G99 is active.