Fagor CNC 8070, Руководство по программированию

Страница: 403 / 556

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Programming manual
CNC 8070
CNC VARI
ABLES
Rel
a
ted
to
ax
is
m
a
ch
in
e pa
ra
m
e
te
rs
14.
(S
OFT
V02.0
X
)
369
PLC reading of LOSPDLIM , UPSPDLIM , STEPOVR , MINOVR and MAXOVR comes in tenths (a
reading of 10 for 1%) Ver "Access to numeric values from the PLC" en la página 358.
SPINDLE Lin Rot Spd Ana Ser
(V.)[n].MPA.AUTOGEAR.Xn Automatic gear change
"0" = No "1"= Yes
— — Yes Yes P/S
(V.)[n].MPA.LOSPDLIM.Xn Lower "rpm OK" percentage — — Yes Yes P/S
(V.)[n].MPA.UPSPDLIM.Xn Upper "rpm OK" percentage — — Yes Yes P/S
(V.)[n].MPA.SPDLTIME.Xn Estimated time for an S function — — Yes Yes P/S
(V.)[n].MPA.SPDLSTOP.Xn M2, M30 and Reset stop the spindle
"0" = No "1"= Yes
— — Yes Yes P/S
(V.)[n].MPA.SREVM05.Xn G84. Reversal stops the spindle
"0" = No "1"= Yes
— — Yes Yes P/S
(V.)[n].MPA.STEPOVR.Xn Override step — — Yes Yes P/S
(V.)[n].MPA.MINOVR.Xn Minimum override (%) — — Yes Yes P/S
(V.)[n].MPA.MAXOVR.Xn Maximum override (%) — — Yes Yes P/S
SOFTWARE AXIS LIMITS
Lin Rot Spd Ana Ser
(V.)[n].MPA.POSLIMIT.Xn Positive software limit Yes Yes — Yes P/S
(V.)[n].MPA.NEGLIMIT.Xn Negative software limit Yes Yes — Yes P/S
(V.)[n].MPA.SWLIMITTOL.Xn Software limit tolerance Yes Yes — Yes P/S
RUNAWAY PROTECTION Lin Rot Spd Ana Ser
(V.)[n].MPA.TENDENCY.Xn Activation of tendency test
"0" = No "1"= Yes
Yes Yes Yes Yes P/S
PLC OFFSET
Lin Rot Spd Ana Ser
(V.)[n].MPA.PLCOINC.Xn PLC offset increment per cycle Yes Yes Yes Yes P/S
DWELL FOR DEAD AXES Lin Rot Spd Ana Ser
(V.)[n].MPA.DWELL.Xn Dwell for dead axes Yes Yes Yes Yes P/S
RADIUS / DIAMETER
Lin Rot Spd Ana Ser
(V.)[n].MPA.DIAMPROG.Xn Programming in diameters
"0" = No "1"= Yes
Yes — — Yes P/S
HOME SEARCH Lin Rot Spd Ana Ser
(V.)[n].MPA.REFDIREC.Xn Home search direction
"0" = Negative "1" = Positive
Yes Yes Yes Yes P/S
(V.)[n].MPA.DECINPUT.Xn Home switch
"0" = No "1"= Yes
Yes Yes Yes Yes P/S
PROBE Lin Rot Spd Ana Ser
(V.)[n].MPA.PROBEAXIS.Xn Probing axis Yes Yes — Yes P/S
(V.)[n].MPA.PROBERANGE.Xn Maximum braking distance Yes Yes — Yes P/S
(V.)[n].MPA.PROBEFEED.Xn Probing feedrate Yes Yes — Yes P/S
(V.)[n].MPA.PROBEDELAY Delay for the "probe 1" signal Yes Yes — Yes P/S
(V.)[n].MPA.PROBEDELAY Delay for the "probe 2" signal Yes Yes — Yes P/S
TOOL INSPECTION
Lin Rot Spd Ana Ser
(V.)[n].MPA.REPOSFEED.Xn Maximum repositioning feedrate Yes Yes — Yes P/S
INDEPENDENT AXIS Lin Rot Spd Ana Ser
(V.)[n].MPA.POSFEED.Xn Positioning feedrate Yes Yes Yes Yes P/S
(V.)[n].MPA.DSYNCVELW.Xn Velocity synchronization window Yes Yes Yes Yes P/S
(V.)[n].MPA.DSYNCPOSW.Xn Position synchronization window Yes Yes Yes Yes P/S