Fagor CNC 8070, Руководство по программированию

Страница: 399 / 556

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Programming manual
CNC 8070
CNC VARI
ABLES
Rel
a
te
d
t
o
gener
al
m
a
ch
in
e pa
ra
m
e
te
rs
14.
(S
OFT
V02.0
X
)
365
RELATED TO ARITHMETIC PARAMETERS PRG PLC INT
(V.)MPG.MAXLOCP Maximum local arithmetic parameter R R R
(V.)MPG.MINLOCP Minimum local arithmetic parameter R R R
(V.)MPG.MAXGLBP Maximum global arithmetic parameter R R R
(V.)MPG.MINGLBP Minimum global arithmetic parameter R R R
(V.)MPG.ROPARMAX Maximum global read-only arithmetic parameter R R R
(V.)MPG.ROPARMIN Minimum global read-only arithmetic parameter R R R
(V.)MPG.MAXCOMP Maximum common arithmetic parameter R R R
(V.)MPG.MINCOMP Maximum common arithmetic parameter R R R
CROSS COMPENSATION TABLE PRG PLC INT
(V.)MPG.MOVAXIS[m] Table [m]. Master axis R R R
(V.)MPG.COMPAXIS[m] Table [m]. Axis to be compensated R R R
(V.)MPG.NPCROSS[m] Table [m]. Number of points R R R
(V.)MPG.TYPCROSS[m] Table [m]. Type of compensation
"0" = Real coordinates "1" = Theoretical coordinates
R R R
(V.)MPG.BIDIR[m] Table [m]. Bi-directional compensation
"0" = No "1"= Yes
R R R
(V.)MPG.REFNEED[m] Table [m]. Mandatory home search
"0" = No "1"= Yes
R R R
(V.)MPG.POSITION[m][i] Table [m]. Master axis position for point [i] R R R
(V.)MPG.POSERROR[m][i] Table [m]. Error of point [i] in the positive direction R R R
(V.)MPG.NEGERROR[m][i] Table [m]. Error of point [i] in the negative direction R R R
EXECUTION TIMES
PRG PLC INT
(V.)MPG.MINAENDW Minimum duration of the AUXEND signal R R R
(V.)MPG.REFTIME Estimated home searching time R R R
(V.)MPG.HTIME Estimated time for an "H" function R R R
(V.)MPG.DTIME Estimated time for a "D" function R R R
(V.)MPG.TTIME Estimated time for a "T" function R R R
NUMBERING OF DIGITAL I/O PRG PLC INT
(V.)MPG.NDIMOD Total of digital input modules R R R
(V.)MPG.NDOMOD Total of digital output modules R R R
(V.)MPG.DIMODADDR[n] Base index of the digital input modules R R R
(V.)MPG.DOMODADDR[n] Base index of the digital output modules R R R
PROBE PRG PLC INT
(V.)MPG.PROBE There is a probe for tool calibration
"0" = No "1"= Yes
R R R
(V.)MPG.PRBDI1 Digital input associated with probe 1 R R R
(V.)MPG.PRBDI2 Digital input associated with probe 2 R R R
(V.)MPG.PRBPULSE1 Type of pulse of probe 1
"0" = Negative "1" = Positive
R R R
(V.)MPG.PRBPULSE2 Type of pulse of probe 2
"0" = Negative "1" = Positive
R R R