manualshive.com logo in svg

Fagor CNC 8060, Перевод оригинального руководства

Fagor CNC 8060 - мощный и надежный продукт с продвинутой аппаратной настройкой для точной обработки материалов. Скачайте бесплатное руководство пользователя для настройки оборудования на manualshive.com и начните работу с этим превосходным ЧПУ.

Поделиться
Скачать
background image

Remote modules.  

CNC 8060
CNC 8065

7.

RCS-S-4F4

AO (SERCOS-II 

PROTOCOL).

Error codes and

 messa

ges on the Sercos co

unter.

·152·

(R

EF

: 1906)

 

7.9.1

Alarm codes. Meaning and solution.

A201 Fagor digital feedback. Analog signal < 0.4 Vpp. E21A feedback.
A301 Fagor digital feedback. Analog signal < 0.4 Vpp. E21B feedback.
A401 Fagor digital feedback. Analog signal < 0.4 Vpp. E21C feedback.
A501 Fagor digital feedback. Analog signal < 0.4 Vpp. E21D feedback.

Level of signal 1 Vpp too low. Check the cable and the connection between the encoder and the RCS-S
module. If the error persists, try replacing the encoder module and/or the cable associated with the
feedback. If the problem persists, contact Fagor Automation.

A202 Fagor digital feedback. Encoder power outside desired values. E21A.
A302 Fagor digital feedback. Encoder power outside desired values. E21B.
A402 Fagor digital feedback. Encoder power outside desired values. E21C.
A502 Fagor digital feedback. Encoder power outside desired values. E21D.

Check that the power supply cable of the encoder is not damaged. Also check that the cable length is
the right one and that the wiring connection is the right one. If the problem persists, contact Fagor
Automation.

A203 Fagor digital feedback. Excessive axis speed. E21A feedback.
A303 Fagor digital feedback. Excessive axis speed. E21B feedback.
A403 Fagor digital feedback. Excessive axis speed. E21C feedback.
A503 Fagor digital feedback. Excessive axis speed. E21D feedback.

The axis moving speed exceeds the sampling capability of the Sercos counter hardware for this type
of encoder signal. Decrease the maximum axis moving speed. If the problem persists, contact Fagor
Automation.

A204 Fagor digital feedback. Internal temperature is out of range. E21A feedback.
A304 Fagor digital feedback. Internal temperature is out of range. E21B feedback.
A404 Fagor digital feedback. Internal temperature is out of range. E21C feedback.
A504 Fagor digital feedback. Internal temperature is out of range. E21D feedback.

The wiring, the feedback device or the feedback of the Sercos counter may have some problem. Check
the condition (shape) of the cable, of the connection or of the feedback device. If the problem persists,
contact Fagor Automation.

A205 Fagor digital feedback. Loss of SOL synchronization. E21A feedback.
A305 Fagor digital feedback. Loss of SOL synchronization. E21B feedback.
A405 Fagor digital feedback. Loss of SOL synchronization. E21C feedback. 
A505 Fagor digital feedback. Loss of SOL synchronization. E21D feedback.

The FeeDat protocol has a SOL (Sign of Life) counter that increases its value every time the master
reads the coordinate. With each interruption in the reading, the counter increases its own software count,
which must be kept so that it matches the SOL of the protocol. This warning occurs when the two counts
do not match.

Содержание CNC 8060





















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CNC 8060

Vacon 20 Quick Manual preview
20
Бренд: Vacon Страницы: 62
GE 400 Series Installation Instructions preview
400 Series
Бренд: GE Страницы: 2
XOXO Modular IXO Operation Manual And Installation Manual preview
IXO
Бренд: XOXO Modular Страницы: 13
Balboa Water Group BP Series User Interface And Programming Reference Manual preview
BP Series
Бренд: Balboa Water Group Страницы: 28
Daikin BRC1E61 Operation Manual preview
BRC1E61
Бренд: Daikin Страницы: 56
Danfoss ERC 211 User Manual preview
ERC 211
Бренд: Danfoss Страницы: 36
National Instruments 9853 Getting Started Manual preview
9853
Бренд: National Instruments Страницы: 29
Madas M16/RMO NA/NC Installation Instructions Manual preview
M16/RMO NA/NC
Бренд: Madas Страницы: 6
Madas EVP/NC Manual preview
EVP/NC
Бренд: Madas Страницы: 11
I-Tork PDS Series Installation & Operation Manual preview
PDS Series
Бренд: I-Tork Страницы: 15
MGC RAXN-LCD Installation And Wiring Manual preview
RAXN-LCD
Бренд: MGC Страницы: 16
Beckhoff CX2550 Series Manual preview
CX2550 Series
Бренд: Beckhoff Страницы: 30
Festo CPS-Gate Operating Instructions Manual preview
CPS-Gate
Бренд: Festo Страницы: 109
Topworx Valvetop DXP Installation, Operation & Maintenance Manual preview
Valvetop DXP
Бренд: Topworx Страницы: 8
APV SUPERSEAL 2014 Series Installation, Operation & Maintenance Manual preview
SUPERSEAL 2014 Series
Бренд: APV Страницы: 20
LEYBOLD SCROLLVAC plus Service Manual preview
SCROLLVAC plus
Бренд: LEYBOLD Страницы: 12
National Instruments PXIe-5698 Getting Started Manual preview
PXIe-5698
Бренд: National Instruments Страницы: 14
Sturtevant Richmont Global 400mp User Manual preview
Global 400mp
Бренд: Sturtevant Richmont Страницы: 73

Бренды по названию

Популярные бренды

Загрузить еще бренды