Fagor 3FS-86314IT, Инструкция по эксплуатации

Страница: 98 / 114

98
DISPLAY AND CONTROL PANEL
The button
6
serves to set the temperature for the respective washing pro-
grammes.
When pushing the button
6
, the display shows the available water temperature
settings or cold water options (without preheating) for the relevant wash pro-
gramme. Depending on the selected wash programme, the display shows the
following setting options: - -°C (cold) - 20°C - 30°C - 40°C - 60°C - 90°C.
Temperature selection button
6
Button
7
serves to set the spin speed during the pumping cycle. Push the button
in order to change the setting. Depending on the selected wash programme, the
display shows the following values - 0 (no spin) - 400 - 600 - 800 - 1000 - 1200 -
1400.
Spin speed button
7
Press the Dry Level button to select the fabrics drying intensity: Extra Dry/Normal
Dry/ Gentle Dry.
Extra Dry: Select this function to wear the garment immediately after drying.
Normal Dry: Normal drying cycle.
Gentle Dry: Dry fabric when removed from the dryer.
Dry Level
8
This function delays programme start by 0 to 24 hours Set the Delay Start
function:
1. Select a programme;
2. Press the Delay start button and select time:
3. Press Start/Pauses to activate the Delay Start function.
Cancel the Delayed Start Press the Delay Start button repeatedly until 0h is
displayed. Press the button before you start the programme. If the programme has
already started, press On/Off.
Notes: In the event of a power failure while the appliance is operating, the pro-
gramme is memorised by the appliance and will continue when power is restored
and you press the Start/Pause button.
Start delay button
5
Gentle Dry
Normal Dry
Extra Dry