Fagor 3FS-86314IT, Инструкция по эксплуатации

Страница: 101 / 114

101
Select additional functions or wash cycle parameters as required –
depending on the needs,
Press the Time Remaining button.
Select time remaining ranging from 0 to 24 hours.
Press the Start/ Pause button The appliance will be set in delay mode.
The wash programme will be automatically terminated.
The end of the wash programme is indicated by “End” in the
display and a sound signal (if this function is active).
Close the water valve.
Switch the washing machine off with the Standby button.
Disconnect the washing machine from the power supply.
Open the door and remove laundry.
In order to abort a wash programme, push the Standby button.
Then switch the washing machine on again, select the required wash programme
and push the Start/Pause
button.
3
4
End of the wash cycle
Aborting and changing the wash programme
Close the appliance door.
Set the programme selector dial to the desired programme (see table).
2
Time Remaining
To set the Time Remaining:
When you set the Time Remaining option, the display will show the time remaining to the
end of the programme.
Set the programme selector turning it left or right.
Customize the programme to your needs – you can change the
temperature, spin speed, or enable additional features.
Press the Start/ Pause button.
1
Select Programme
About 10 minutes after the end of the wash programme, the display switches to the
energy-saving mode (instead of “End”, “ ” now blink in the display).
The energy-saving mode remains active also, if within 10 minutes after the washing
machine was switched on with the Standby button, the selector dial is not turned and
no button is pushed.
5
Display energy-saving mode
USING THE APPLIANCE