Faema E92, Руководство пользователя, Страница: 43 / 80

English English
63
Programming measures using the “SELF-LEARNING”
function: milk dose
To memorize the programming of the milk dose, follow the
procedure herebelow:
1) Place the cup by the cappuccino maker (
18 ).
2) Press the PROG ( 32 ) key; the following message will
appear on the display:
when modifying data, the cursor changes to "
Æ Æ Æ Æ Æ
".
3) Keep the distributor key pressed, as evidenced by the
flashing led (the coffee dose counter starts from zero and
increases in value).
selection XXX
Milk dose 03.6s
+
u
u
Æ Æ Æ Æ Æ
selection XXX
Milk dose 03.6s
+
u
u
4) When the quantity of milk in the cup has reached the
desired level, release the key (the counter will indicate the
rime that correspond to the set dose).
It is also possible to vary the milk dose or set the dose using
the “+” (
34 ) and “-” keys ( 35 ).
N.B.: If the coffee dose is set to “00.0”, the key may only be
used for coffee distribution.
When the key
444 444 444 444 444
( 33 ) is pressed, the following message
is again displayed:
Programming measures using the “SELF-LEARNING”
function: coffee dose
To perform the coffee dose programming, follow the
procedure herebelow:
1) Fill the filter carrier (
21 ) with the correct dose of ground
coffee) and insert into the group ensuring it is correctly
locked in place (
do not use previously used coffee
grounds ).
2) Place the cup by the filter carrier spout ( 21 ).
3) Press the PROG ( 32 ) key; the following message will
appear on the display:
when modifying data, the cursor changes to "
Æ Æ
Æ Æ
Æ
".
4) Keep the distributor key pressed, as evidenced by the
flashing led (the coffee dose counter starts from zero and
increases in value).
selection XXX
Water dose 090
+
u
u
Æ Æ Æ Æ Æ
selection XXX
Water dose 090
+
u
u
5) When the quantity of the coffee in the cup has reached the
desired level, release the key (the counter will indicate the
number of pulses that correspond to the set dose).
It is also possible to vary the coffee doses or set the dose
using the “+” (
34 ) and “-” keys ( 35 ).
When the key
444 444 444 444 444
( 33 ) is pressed, the following message
is again displayed:
( ** ) Start milk/Start coffee function
By setting:
" Start milk 00 " - milk dispensing takes place when the
selection key is pressed. After a few seconds, coffee is
dispensed;
"
Start milk 99 " or at a high setting that exceeds the coffee
dispensing time - milk dispensing starts after coffee is
dispensed.
"
Start milk 05 " - coffee dispensing starts, and 5 seconds after
the selection key is pressed, milk is dispensed.
Note: If the time setting exceeds the coffee dispensing time,
milk dispensing begins immediately after coffee is dispensed.
" Start coffee 00 " - Coffee dispensing starts after milk is
dispensed.
"
Start coffee 99 " or any setting other than 0 - coffee dispensing
will start 99 seconds (or after the set time) after milk is
dispensed.
The cappuccino beverage can be made as follows:
- First dispensing coffee and then milk.
- First dispensing milk and then coffee.
You can use the"+" ( 34 ) and "-" ( 35 ) keys to change the " Start
milk " setting (milk dispensing start delayed after coffee
dispensing and vice versa) from " 00 " to " 99 " with " 1 " second
increments.
If over "
99 " is set, the "Start milk" setting will become the " Start
coffee " setting (coffee dispensing start delayed after the milk
dispensing), then the setting returns to "Start milk" in a cycle.
The default settings for
cappuccino selections
are: Start milk 00.
Start Milk
Start Coffee
00 99
00 99