Faema E92, Руководство пользователя, Страница: 30 / 80

English English
50
1. Switching on – electric
“Before switching on the machine, ensure the
following:
The mains switch is on.
The water mains tap is open”.
Press the master switch ( 1 ); the indicator light “machine on”
( 2 ) switches on.
At the same time, the current working pressure “boiler
pressure 0.00 bar” is displayed (
14 ).
If the water level in the boiler is less than the minimum
required, the indicator light “boiler level” (
4 ) lights up and the
boiler is filled up to the correct level (indicator light 4 switches
off).
Press the master switch (
1a ) to position 2.
The heating element inserted indicator light ( 3 ) lights up.
The boiler is heating. Wait until the pressure reading on the
display corresponds to the required working pressure value,
i.e. the indicator light (
3 ) switches off.
!!!!!
CHARACTERISTICS
- Roomy cup-heating shelf
- Choice of several heating temperatures
Arrange the cups on the shelf. Best results are obtained
when NOT MORE than three layers of cups are put on the
shelf.
2. Cup-Warmer
!!!!!
CAUTION: do not put any cloth on the cup-warmer.
1 2 4 1a 3 6
“Do not switch on the gas when the boiler is under
pressure”.
Before switching on the machine. check the following:
- The mains switch is on.
- The water mains tap is open.
- The gas cut-off cock is open
Press the mains switch ( 1 ) to position 1, the indicator light
“machine on” ( 2 ) lights up.
At the same time, the current working pressure “boiler
pressure 0.00 bar” is displayed (
14 ).
If the water level in the boiler is less than the minimum
required, the indicator light “boiler level” (
4 ) lights up and the
boiler is filled up to the correct level (indicator light 4 switches
off).
Press and rotate the knob of tap (
24 ) towards the left to
position B , and keep pressed for about 30 seconds. Check
that window ( 23 ) is open and after a few seconds release
knob ( 24 ).
The boiler is heating up. Wait until the indication on the display
(
14 ) corresponds to the pressure value required.
3. Switching on – gas (only for G machines)
!!!!!
24 4 2 1
B
To change the cup-warmer power, press the key ( 6 ) a number
of times.
- All LEDS on = full power
- All LEDS off = OFF
When the machine is turned off after the day’s operations,
the selections will remain in the machine’s memory.