![background image](http://html1.mh-extra.com/html/fadini/hindi-880-evo/hindi-880-evo_instruction-manual_3200162017.webp)
Pic. 5
Pic. 6
This distance
depends on B
(Pic. 7 and Pic. 8)
Rear fixing
Front
fixing
WARNING:
if any welding is carried
out to complete the front
fixing with Hindi 880-evo
installed,
make sure the shaft is
suitably protected.
Make sure the operator
is levelled in all
directions before fixing it
IMPORTANT: in case of heavy gates, it is recommended that
fixing to the gate post and gate leaf be stronger by providing
rigid patching plates (not supplied by the manufacturer).
Reinforcement patching plate
(optional). With heavy
installations, it is recommended
to provide a plate adequate to the
gate type.
PREPARING THE FIXING PLATES
First weld the front and rear fixing plates to the patching plates (Pic. 5), after assessing the installation measurements as indicated
in Pic. 6 and Pic. 7 (or in Pic. 8, in the case where opening is required to be outwards).
!
HINDI 880-evo: stroke 150 and 280 mm
21 mm
HINDI 880-evo: stroke 400 mm
35 mm
Misalignment between post- and gate-fixings, measured from the fixing centers:
Pic. 7
FIXING GEOMETRY FOR THE GATE TO OPEN INWARDS
Closed position
gate stop
A
B
80 (with 150 and 280 mm strokes)
100 (with 400 mm stroke)
stroke (mm)
A
B
150
60
80
280 (non braking)
130
130
280
(braking)
120
130
400 (non braking)
210
180
400
(braking)
200
160
Fixing distances for
95°
opening
stroke (mm)
A
B
280 (non braking)
130
85
280 (braking)
130
80
400 (non braking)
190
120
400 (braking)
200
90
Fixing distances for
120°
opening
It is always recommended, before the operator fixing is finally completed, that a few manual
tests be carried out with Hindi 880-evo to assess that the installation distances are correct.
!
!
universal oil-hydraulic operator for swing gates
HINDI 880 - evo
English
17