![background image](http://html1.mh-extra.com/html/fadini/hindi-880-evo/hindi-880-evo_instruction-manual_3200162015.webp)
1 - N° 2 coded keys to open the sliding cover
2 - Cover front plug
3 - Anodized aluminium cover
4 - Inner manual release key
5 - Rear protection cap
6 - cable gland
7 - Oil-hydraulic operator: stroke range 150 mm, 280 mm and 400 mm
8 - N° 2 tie rods for cover fixing
9 - N° 2 grommet nuts for cover and plug fixing
10 - Round-headed spanner
GENERAL INFORMATION ABOUT THE PRODUCT
HINDI 880-evo is an oil-hydraulic operator for external application on swinging gates to automatically open and close them. It is
an oil-hydraulic product and therefore it possesses all the advantages this kind of technology can offer such as reliability, smooth
linear movements and adjustable thrust power made possible by the pressure valves, it can suit any kind of swinging gates.
The main asset of HINDI 880-evo is that of including, in one version only, all the available oil-hydraulic options as it can be turned
into any of the following units: double- or single-locking, non locking and in this case the gates do not need any release action
first and can be operated by hand in either one direction or both travel directions (always reversible), adjustable braking control
in opening and closing or non braking option.
An electronic control board is required for the functioning of the operator and has to be externally installed in a sheltered place.
The electronic unit controls all the moving functions either in automatic or semi-automatic modes, depending on the user’s
requirements. The operator can come complete with a range of accessories that ensure safety and full control of the operations in
any application, public or private.
COMPONENTS AND ACCESSORIES SUPPLIED WITH IT
SCOPE OF APPLICATION
Optional on request
2
3
4
5
1
6
7
8
9
11
12
13
14
15
17
18
19
16
10
11 - Front fixing for Hindi 880-evo strokes 150 mm and 280 mm
12 - front fixing circlip
13 - Front fixing for Hindi 880-evo stroke 400 mm
14 - M12 self-locking nut
15 - Rear fixing to gate post
16 - M12x40 rear fixing screw
17 - Rear cap fixing pin
18 - Rear patching plate 150x150 mm - (optional) code No. 8311L
19 - Front patching plate120x120 mm - (optional) code No. 8310L
20 - Front patching plate 84x84 mm - (optional) code No. 8312L
20
FA
D
IN
I
FAD
INI
(*) = for gate leafs equal to or wider than 2,0 meters, it is always recommended that an electric lock be fitted.
1,0 m
stroke 150
2,5 m (*)
4 m (*)
stroke 280
stroke 400
with an electric lock
Pic. 1
Pic. 2
!
universal oil-hydraulic operator for swing gates
HINDI 880 - evo
IMPORTANT:
the gate post and the rotation
hinges must be adequate to take
the gate weight and inertia
during the entire opening and
closing movements.
English
15