Facina_VKPCCTV_Instructions_Rev01
19
•
Press
[M]
to confirm the camera’s operation is PIR
detection.
•
Press
[UP]
or
[DN
] button until the word
CAM
and
burSt
are blinking.
•
Press
[M]
button ONCE to confirm the camera into still
image burst setting.
•
Press
[UP]
or
[DN]
button to select the desired burst
setting (number of pictures per trigger).
•
Press
[M]
to save your selection, then the
CAM
and
T-O
(time out) will blink. Press
[M]
button to enter time out
setting or pressing and hold the
[M]
button 2 seconds to
exit.
Setting the Time of Video length in PIR mode:
Your camera can be programmed to record 5 ~ 600 seconds
(00:05-10:00 minutes) of video per trigger. The Video capture is
only workable under PIR mode.
•
After set camera operated at PIR detection, press
[M]
to
confirm.
•
Press
[UP]
or
[DN
] button until the word
VIDEO
and
T
are
blinking.
•
Press
[M]
button ONCE to confirm the camera into video
recording time setting.
•
Press
[UP]
or
[DN]
button to select the desired time
5~600 seconds (video recording time per trigger).
•
Press
[M]
to save your selection, then the
VIDEO
and
T-O
(time out) will blink. Press
[M]
button to enter time out