Facina_VKPCCTV_Instructions_Rev01
16
•
Press
[UP]
or
[DN]
button to adjust the first digit of Hour then
press
[M]
to confirm, and go to next digit of hour then
[M]
and
move to the Minute setting.
•
Press
[UP]
or
[DN]
then
[M]
button
repeatedly to set the Minutes in digit by
digit until minute setting is completed
then
move to set Date, the
D
(Date) will
show at display.
•
Adjust the Year, Month and Day by pressing
[UP]
or
[DN]
and
then
[M]
button in digit by digit to complete the setting. Each
time you finish an adjustment, you MUST press
[M]
button to
confirm and move to the next digit for adjustment.
•
Once done, the word
GPS
will be blinking, this stands for GPS
coordinate value setting. To exit by pressing and hold the
[M]
button 2 seconds.
Setting the Programmable Mode:
Your camera can be programmed to operate either in PIR
Detection mode or Time Lapse / PIR mode when programmed at
the
TEST
and switched back to
CAM
.
Select the Switch
to
CAM
- This allows the user to define what
setting the camera will use.
Passive Infrared Mode
Time-Lapse / PIR Mode