Facina_VKPCCTV_Instructions_Rev01
12
Special Requirement when Using Batteries.
WARNING: Do not use different Voltage lead acid
battery other than the one specified in this section.
Doing so will damage the camera and will void the
warranty.
Do not mix old and new batteries, and Do not mix
alkaline, standard, or rechargeable batteries.
WARNING: ALWAYS have the camera in the OFF
position when installing or removing batteries and
memory card. Removing batteries or memory card
while the camera is ON may damage the camera.
Battery and Memory Installation
The
camera
is designed to operate with two different types of
supply, either 6xAA alkaline batts or remote 12v DC
NOTE: Make sure camera is in the OFF position
whenever adding or removing memory.
“AA” Battery (not supplied)
The internal battery tray accepts 6 pieces of “AA” battery. Be
sure to use high quality branded alkaline batteries. Install
batteries with correct polarity (+/-) as noted inside the battery
tray.
12V DC external power (not supplied)
The camera is equipped with an external power socket designed
to accept a 2.1mm jack plug 12V DC adaptor or battery pack
(sold separately).