Facina_VKPCCTV_Instructions_Rev01
11
Initial Camera Set-up:
1.
Open the front cover
2.
Insert SD card into the camera SD card slot until secured, ensure
card inserted the correct way round
3.
Pressing the “EJECT” button and slide out the battery tray out,
install 6 “AA” batteries (Not Supplied) into the tray ensuring the
correct polarity (+/-) as indicated in battery tray, then push the
battery tray back into camera
4.
Sliding the switch from
OFF
to
TEST
to adjust the Time and Date
5.
The status display shows
“T”
flashing, if
“Test”
is displayed then
please refer to “Time & Date Setting” on page 16
6.
Press the
[UP]
or
[DN]
button to adjust the first digit of Hour
then press
[M]
to confirm, and go to next digit of Hour then
[M]
and move to the Minute setting.
7.
Press the
[UP]
or
[DN]
then
[M]
button repeats to set the
Minutes in digit by digit until Minute setting is completed then
move to Date
8.
Adjust the Year, Month and Day by using
[UP]
or
[DN]
and then
[M]
button in digit by digit to complete the setting. Each time
you finish an adjustment, you MUST press the
[M]
button to
confirm and move to the next digit for adjustment.
9.
Once it is done, the word
GPS
will be blinking, this stands for
GPS coordinate data setting and will allow you to set your
camera’s coordinate data. Press and hold the
[M]
button 2
seconds to exit.
NOTE: The Time and Date will be stamped onto the
image or video.