Fac S220, Руководство по эксплуатации и обслуживанию

Страница: 64 / 70

MOCA DECLARATION
DECLARATION OF CONFORMITY OF THE MATERIALS AND OBJECTS
DESTINED TO COME INTO CONTACT WITH FOOD PRODUCTS
1. With this document, it is declared that the product/article/machinery:
VERTICAL GRAVITY SLICER WITH PAINTED STRUCTURE FLYWHEEL
supplied for prolonged contact with foodstuffs;
IS COMPLIANT
WITH THE FOLLOWING EUROPEAN COMMUNITY LEGISLATION:
• Regulation 1935/2004 EC
• Regulation 1895/2005 EC
• Regulation 10/2011 EC
AND THE FOLLOWING ITALIAN LEGISLATION:
• Ministerial Decree 21/03/1973 and as amended, including MD 140/2013
• Italian Presidential Decree 777/82 and as amended
2. The blade of the afore-mentioned slicer is manufactured with the following alloy:
• AISI 420, C45 _ All domestic CE models and models with blade diameter from 195 to 250 mm CE
professional
• AISI 420, 100Cr6 models with blade diameter from 300 to 370 mm CE professional
FOODSTUFF SUITABILITY TEST
The material respects the overall migration and specific migration limits of nickel, chrome and
manganese in the test condition given by the producer supplier of the CHIARAVALLI GROUP
SPA AND SLAYER BLADE SRL blade;
The slicer coating material contains substances subjected to restrictions in the legislation stated:
NAME CAS Value detected QM(t) mg/kg
4,4’-methylene (phenylisocyanate) cas 101-68-8 0,0120 1
Since the value detected is lower than the QM(t) value, the slice is deemed compliant.
TEST CONDITIONS
MIGRATION IN WATER MIGRATION IN OIL
Met.: BS EN 1186:2006 Met.: BS EN 1186:2006
CONTACT CONDITIONS CONTACT CONDITIONS
Surface/volume ratio: ..................................0,5 Surface/volume ratio: ...................................0,5
Time .......................................................30 min Time ....................................................... 30 min
Temperature .............................................40°C Temperature ..............................................40°C
The simulants and test conditions are selected on the basis of the Directives 82/711/EEC and
85/572/EEC and as amended and Decree n.338 dated 22/07/1998. (See note at the end of the
document regarding art. 22 of Reg. (EU) n.10/2011 on Transitional Provisions).
The overall migration limit, along with the other restrictions/specific migrations to which the
monomers and/or additives present in the material are subjected, are respected in the conditions
of use mentioned above. The affirmation is supported by analytical tests performed in compliance
with the Directives 82/711/EEC, 85/572/EEC and 97/48/EC and with Italian Ministerial Decree
21/03/1973 or on the basis of the calculations carried out considering the content of the substances
subjected to migration limits. The calculations were made assuming that 1 kg foodstuff comes into
contact with 1 product.
The material contains substances governed by Regulations (EC) n. 1333/2008 and 1334/2008 and
as amended (substances called “dual use”).
According to experimental data and/or theoretical calculations, these substances are compliant
pursuant to art. 11 of Regulation (EU) n.10/2011 paragraph 3, letters a and b and of Italian Ministerial
Decree 21/03/73.
This declaration is valid from the date shown below and will be previously replaced if changes
are made to production/formulation of the material or if the references to legislation in point 1 are
modified and updated in a way to require a new verification to confirm conformity.
NOTE: this declaration is drawn-up pursuant to art. 22, paragraph 1: “Transitional Provisions” and
art. 23 “Coming into force and application” of the Regulation (EU) n.10/2011.
The following Test Reports relative to the migration tests performed are available on the website.
Test report n°8395-01 Bpsec S.r.l.
Test report n°8395-02 Bpsec S.r.l.
Test report n°8395-03 Bpsec S.r.l.
Test report n°13507/01 Bpsec S.r.l
62