Fac S220, Руководство по эксплуатации и обслуживанию

Страница: 29 / 70

27
EN
SLICER CLEANING
• Fully unscrew (counterclockwise
rotation) the blade guard locking tie
rod (17);
• If the blade guard (9) is blocked, press
on the rod knob (17) to move it;
• Remove the tie rod (17) and remove
the blade guard (9) using only the
special lateral knobs (23);
• Loosen and remove the two screws
with knurled head (24);
• Remove the deflector (25).
24
24
25
23
23
11
9
17
26
4
5
6
7
8
3
2
EN
SLICER CLEANING
The machines have to be carefully cleaned at least once a day; if it is
necessary more frequently. After a shorter or longer period of inactivity
clean the slicer before use.
WARNING: Cutting hazard!
Use protective cut- and tear-resistant gloves and perform
all operations with extreme care.
PAY ATTENTION AT ALL TIMES!
7
.1 - Disassembling the machine for cleaning
• Disconnect the plug from the mains power supply.;
Take to ‘0’ the adjustment knob of the gauge plate (4);
☞
• Remove the various components as described in the following paragraphs;
4