Fac F250 TS-V Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 62

Fac F250 TS-V Скачать руководство пользователя страница 48

46

EN

TAKING THE SLICER OUT OF SERVICE

8

.1 - Correct procedure

A machine compromises:
•  Aluminium-alloy frame.
•  Stainless-steel inserts and components.
•  Electrical parts and electrical cables.
•  Electrical motor
•  Plastics, etc.

When commissioning third parties to perform dismantling and demolition, only businesses

authorised to dispose of these materials should be employed.

When demolishing without outside assistance, sort the various types of material and hand

over to authorised businesses for disposal.

ALWAYS comply with the current legislation of the country in which the

slicer is utilised.

☞

WARNING: ALWAYS consult the manufacturer or authorised

service staff as regards removal and disposal of the blade (11)

so that this can take place in complete safety.

DO NOT ABANDON SCRAPS AS THEY ARE A SERIOUS

DANGER FOR PEOPLE, ESPECIALLY CHILDREN, AND

ANIMALS.

--------------------------

Refer to the “Instructions for treatment at the end of life” on page 11.

«
...
46
47
48
49
50
...
»

Содержание F250 TS-V































































Отзывы:

Нет отзывов