Fac F250 TS-V, Руководство по эксплуатации и обслуживанию, Страница: 13 / 62

11
EN
1
.1 - UNPACKING
When taking delivery of the slicer, ensure
that the packaging is fully intact; if this is
not the case, please advise the courier or
local dealer immediately.
In order to remove the slicer from the
packaging, please proceed as follows:
• Cut and remove the plastic bands.
• Open the box and take out the instruc -
tion booklet.
• Proceed as described hereafter.
- Remove the protective cardboard
covers from inside the box .
- Lift the machine with great care
and place on a solid surface.
- Remove the plastic bag in which
the slicer is wrapped.
Check that all components specified
in the delivery note and this in -
struction booklet are present and
fully intact.
• Should any faults be noted, such as:
- dents to the frame or guards;
- controls that are either not
working or broken;
- missing items or other problems;
please advise the courier, manufac -
turer and service centre immediately.
- Carefully dispose of packaging com -
ponents (bands, cardboard, polysty -
rene, polythene bags, etc.) as report -
ed below and in accordance with the
standards of the below and compli -
ance with the standard of Country of
use.
PACKING
This product complied with Directive 2012/19/EU.
The crossed out wheeled bin symbol on equipment indicates that it must be treated separately
from household waste at the end of its working life and therefore taken to a recycling facility for
electrical and electronic equipment or handed over to the reseller when purchasing new equipment
of the same type.
The user is responsible for consigning the equipment to appropriate collection facilities at the end
of its working life or face the penalties provided for by current waste management legislation.
Separate collection for subsequent delivery of waste equipment to environmentally-compatible
recycling, treatment and disposal facilities to prevent possible negative impacts on the environment
and human health whilst encouraging recycling of the product’s components.
For further information regarding the available collection facilities, please contact your local refuse
collection service or the shop in which the purchase was made.
Manufacturers and/or importers fulfil their obligations concerning environmentally-compatible
recycling, treatment and disposal either directly or by joining a collective scheme .
GUIDE TO THE TREATMENT OF WASTE EQUIPMENT