FabWeaver A530 Скачать руководство пользователя страница 69

Страница: 69 / 120

-31

UI Menu Description

Information

The default information of the printer can be checked. In addition, the firmware update and printer history can also be

checked.

To change the name and password of the printer, press the

[Change]

button in the Name & PW field. Enter the new

name and password and press the

[Change]

button.

Reference

- Before changing the name and password of the printer, enter the existing password.

The default password is “0000”. The setting password is used for the security function.

If a network is connected, check if there is an available firmware version to update. If so, download the latest version.

In the F/W Version field, press the

[Update]

button. Press the

[Check]

button to check if there is an available version

to update. If there is a latest version, download it to update the firmware. Once the update is completed, reboot the

printer.

Содержание A530

























































































































Результаты поиска

Содержание A530

Отзывы:

Похожие инструкции для A530

Бренды по названию

Популярные бренды

FabWeaver A530, Руководство пользователя

Результаты поиска

Содержание A530

Отзывы:

Похожие инструкции для A530

Бренды по названию

Популярные бренды