1
-8
Preparation for Use
1
3
Open the cover on the right of this product. Then, you can see the filament box connector. The top connector is
connected to the nozzle 1 and the bottom one is to the nozzle 2.
Connector
to Nozzle 1
Connector
to Nozzle 2
4
Connect the cables according to color codes of the filament box connectors. Insert the tube up to the marked
position on the end of the tube as follows:
Tube Insertion
(Two Locations Displayed)
Connect Blue Cable
Insert Tube
Connect Black Cable
Caution
- The cable and tube from one filament box should be connected to either the top or the bottom.
Do Not connect them to the top and the bottom.
- If the cable and tube from one filament box are connected to the top and the bottom,
the product will malfunction.
Содержание A530
