background image

 

THANK YOU FOR BUYING OUR PRODUCT! 

 INTRODUCTION 

1

.

The  boilerand  and  all  associated    equipment  must  be  installed  and  used  in  accordance  with  the  installation 

design,  all  applicable  legal  regulations  and    technical  standards  and  with  manufacturer´s  instructions.The  boiler 
may be used  only for the purpose for which it is intended. 

2.The boiler may be instelled only in an enviroment which i tis designed for.If the boiler is delivered to the client 
by  the  same  person  who  installs  it,  he  must  give  the  user  also  all  accompanying  boiler    documentation(  in 
particular User Guide, Service Book, etc.). Until the  boiler is put into service, the  original packing must be kept 
in case the  boiler has to be transported again. 

3.After installation,the boiler must be put into operation  by a service organisation authorized by the manufacturer. 

4.The    boiler  complies  with    regulations  applicable  in  the    European  Union.When    used  in    the    conditions  of 
countries  outside at EU, any deviations from local regulations must be identified and rectified. 

5.In the  event ofa defect, call an  authorized manufacture´s service  organisation-any unauthorized  interference 
may  damaged  the  boiler ( and  possibly also  associated equipment!). 

6.The servicetechnician putting the boiler into operation for the first time must show the user the  various parts of 
the    boiler    and  how    to  control  the    boiler,  with  the  boiler  safety  elements,their    signals  and  appropriate  user 
reaction to them, with fundamental parts of the  boiler controls.If the boiler is  delivered to the client by  the same 
person who installs it,he must make sure that the original packikg is avaible in case the boiler has to be transported 
again. 

7.Chek the delivery for completeness. 

8.Chek whether the model and type supplied is suitable for the  required use. 

9.Whenever  you  are  not  certain  how  to  control  the  boiler,  study  appropiate  instructions  in  this    Operation  and  
installation Guide carefully and proceed  accordingly. 

10.Never remove or damage any markings and  signs on the boiler.Keep the original  packing  until  the  boiler has 
been  put into service, in case  the  to  be transported again. 

11.When  making any repairs, olny original parts  must  always be  used .It  is  forbidden  make any changes to the  
boiler´s   internal installaton, orto interfere with it any way. 

12.At the end of its life cyyle, the boiler its  package  and  its  parts must be  disposed of  in a way avoiding harm ti 
the enviroment. 

13.The manufactured disclaims any responsibility for damages caused  by the  failure to abide by:  

-The conditions stipulated in this  Operation and  Installation Guide 

-Applicable rerulations and standards 

-Sound installation and  operation procedures 

-Condiotions stated in the  Warranty Certificate and the  Service Book. 

Situations might occur in  practice,  when the following esential precaution must be taken: 

Shut the boiler down every time when there  are any  ( event temporary ) flammable or explosive fumes present  
on  the  premises  from whitch  combustion air  is  supplied the boiler ( e.g. from  paint when  painting, laying and  
spraying  molten  substances, from gas leakage, etc. ): if  it is  necessary to drain water  from the   boiler  or  from  
the    whole    system.,  the  water    must  not  be    dangerously  hot.If  there  is  any  leakege    from    the  boiler´s  heat  
exchanger is  clogged  up   with ice , do  not  attempt  to  start  up  the boilre until  normal operating  conditions  
have  been  restored.    

Ensuring safety of equipment and  people

 

The boiler ( and all acessories ) comlies   with  the  requirements of EN 303-5 its  updates and  all  relevant 

European  standarts.  In  order  to  run    and  operate  the    boiler  in  accordance  with  the  purpose  for    which  it    is  
designed    in  actual    conditions    of  use    (  hereafter    referred  to  only  as    use),  it    is    necesarry  to  abide    also    by  
additional   requirements the most  essential ones of  which (i.e. those which must  not be  omitted) are  found in  
the   related regulatory  documents.In  addition to  the  above mentioned documents,  it  is  necessary when using  
the boiler to  proceed  in  accordance  with this. Operation  and  Installation  guide and the  accompanying boiler 
manufacturer´s  documementation. Any interference by children,  person under the  influence of  narcotic drugs, 
certified person,etc,when using  the boiler,  must be  prevented. 

Содержание STR PLUS 25




















Отзывы: