UK/IRL
UK/IRL 43
10.4.4 Changing the batteries (continuing)
Remote control
1. Remove the cover on the back of the remote control.
2. Carefully remove the battery clip along the side. Pay attention not
to pull the wires.
3. If necessary, remove the old batteries and place the new ones: 2 x
LR03 Alkaline long life 1.5 V. Pay attention to the + and - position.
4. Click the battery clip into the remote control and close the cover.
5. It might be possible that you have to set the transmission code
after changing the batteries (see 10.4.3).
Note
Batteries are chemical waste and should be disposed in accordance
with local regulations.
UK/IRL
UK/IRL 44
11. CLEANING AND SERVICE
INSTRUCTIONS
Important
:
Turn off the fire and allow it to cool down before commencing cleaning.
It is recommended that, the fire, is inspected/serviced, by a competent person at least
once a year.
To maintain the finish on the trim wipe with soft damp cloth only. Do not use abrasive
cleaners, polish or solvents as these can damage the surface finish.
Содержание TIMRA
Страница 2: ......