Faber LEVANTE G LEVG24SS300, Инструкции по установке; Информация по использованию и уходу

Страница: 96 / 100

96
SUSTITUCIÓN DEL FILTRO DE CARBÓN ACTIVADO
Los filtros de carbón activado no son lavables y no pueden ser regenerados.
Se deben sustituir aproximadamente cada 4 meses de funcionamiento, o más
frecuentemente con un uso intensivo.
Retire los filtros de grasa.
Retire el filtro de carbón
viejo quitando los dos torni-
llos y luego instale el nuevo
filtro utilizando los mismos
dos agujeros para tornillos.
Vuelva a instalar los filtros
de grasa.
1
2
3
EN
77
INSTALLATION
Fitting the Hood canopy
BEFORE FITTING THE HOOD TO THE WALL UNIT, PROCEED AS FOLLOWS:
• Disconnect the wires to the Commands at the connectors.
• Disconnect the wires to the Light at the con-
nectors.
• The Hood can be installed directly on the
underside of the wall unit (Minimum 650 mm
from the Cooker Hob).
• Create an opening in the bottom of the wall unit,
as shown.
• Insert the hood until the side supports snap into
place.
• Fasten using the 10 screws 12a provided.
• Lock in position by tightening the screws
Vf
from
underneath the hood.
• Open the suction panel by turning the specific knob.
• Disconnect the panel from the hood canopy by sliding the
fixing pin lever.
• Remove grease filters.
• Screw the Frame into place
using the 6 screws 12f , re-
connect the wires to the
Commands and Light, re-
place the metal grease filter
and the Panel.
260
13
495 - 675