Faber Fyn 450 ENG, Руководство по установке, Страница: 4 / 28

3 < < < <
L
1 Introduction
The appliance can only be installed by a competent person in accordance with the Gas
Safety. We urgently advise you to read this installation manual properly.
This appliance complies with the Gas Appliance Regulation (EU) 2016/426.
Harmonized standards applied EN 613 2000/A1 2003.
2 Safety instructions

Please note:
It is advisable to always install a screen for the fireplace if children, elderly or disabled
people are present in the same room as the fireplace. If regularly vulnerable persons can
be present in the room without supervision, sufficient protection must always be placed
around the fireplace.The appliance should be placed, connected and annually checked in
accordance with these installation instructions and valid national and local Gas Safety
(Installation and Use) Regulations.

The appliance is designed for atmospheric and heating purposes, meaning that all
visible surfaces, including the glass, can become hotter than 100 ° C.

Do not use the remote control and / or app outside the room where the fire is
located. So that you are always aware of the situation around the fireplace when it
is being operated.

Check whether the data on the registration plate are in agreement with the local
type of domestic gas and pressure.

The fitter is not permitted to change these adjustments or the construction of the
appliance!

Do not place any additional imitation logs or glowing coals on the burner or in the
combustion chamber.

Do not use the remote control and / or app outside the room where the fireplace is
located. So you are always aware of possible attendees and the situation around
the fireplace when it is ignited.

Do not place any inflammable materials within a of 0,5m. of the radiation of the
appliance and ventilation grills.

Due to natural air circulation of the appliance, moisture and volatile components
from paint, building materials, floor coverings etc. that haven’t yet set, can be
drawn through the convection system and can be deposited on cold surfaces as
soot. That is why you should not use the appliance shortly after a renovation.