Faber Duet XL, Руководство по установке

Страница: 11 / 28

L
10 < < < <
4.4 Placing the appliance
Take the installation requirements into account (see chapter 3 )
4.4.1 Standing on the floor
Place the appliance into the proper position and if necessary, adjust the height with the
adjustable legs.
Adjusting the height and leveling the hearth with a spirit level.(see fig. 1.4)

Rough height adjustment:
o
with the extending legs, or the long additional legs.

Accurate:
o
with the rotating adjustable legs.
4.4.2 Suspended from the wall
The appliance can be mounted suspended from the wall with the use of the suspension
bracket and the Rawlplugs supplied (see fig.1.3). These mounting materials are
exclusively intended for use on walls constructed of brick or concrete. For walls built of
other materials, such as hollow bricks, consult a professional expert.
4.5 Mounting the smoke emission outlet materials

In case of a wall or roof terminal, the hole must be at least 5 mm bigger than the
diameter of the flue material.

Horizontal parts must be installed at a (3 degree) slope up away the appliance.

Build up the system from the appliance. If this is not possible, you should make use
of a adjustable pipe .

For fitting the system a ½ metre cut-down pipe should be used. Make sure the
inner pipe is always 2 cm longer than the outer pipe. Wall and roof terminal are
also shortened. These parts must be secured with a self tapping screw.

Do not insulate but ventilate bild-in flue material (approx.100cm2)
4.6 Building a false chimney breast.
Before constructing the false chimney breast we advise you to perform a function test with
the appliance as described in chapter 7 “checking the installation”