Faber Duet XL, Руководство по установке

Страница: 13 / 28

L
12 < < < <

Remove the front glass first.

Place the suction discs onto the glass

Remove the sealing cord from the groove

Slide the glass upwards now, so that the bottom edge is released from the groove.
Now gradually move the bottom edge of the glass forwards slantwise and lower the
glass into the opening between the build-in frame and the appliance. (see fig. …
and 2.5 , 2.6 and 2.7)

Now gradually move the top edge of the glass forwards and upwards out of the
appliance (see fig. 2.8 )
To replace the glass repeat the process in reverse order.
Remove all Fingerprints from the glass, these will be burned into it once the hearth is
used.
6 Plaatsen van het decoratiemateriaal
It is not allowed to add different or more materials to the combustion chamber.
Always keep the pilot burner free from decorative material!
Do not toss all the decorative material onto the burner all at once, as the very fine dust
may block the holes in the burner.
6.1 Imitation logs

Spread the vermiculate preferably by hand over the tube burners in the burner-slot.
The surface of the pebbles may be very slightly elevated from the burner plate but
it should be level throughout the entire length.

Place the imitation logs according to instructions. (see fig. 3.1. or the instruction
card)

It is optional whether you apply chips to the combustion chamber or not. Prevent
chips from covering the burner, this has a negative effect on the fire image.

Start the pilot en main burner, according to the instructions in the user’s manual.
Assess whether the flame distribution is correct.

Place the glass and check the flame picture into the appliance
6.2 Pebbles

Remove the burner plates F (see fig. 3.2)

Place the pebbles over the burner and the bottom. Spread the pebbles evenly to a