Faber Duet XL, Руководство по установке

Страница: 12 / 28

L
11 < < < <
4.7 False Chimney breast

Construct the false chimney breast from non- combustible material in combination
with metal profiles or of brickwork / aerated concrete bricks.

Take the grills and the service panel (see fig. 1.1 an1.2 )into account. Place a
protective shield made of non- combustible material above the grills (see fig 1.1 A)

Always use a lintel if the chimney breast is constructed of brickwork. This should
not be placed directly onto the appliance
4.8 Frameless without optional decorative sheet

Construct the false chimney breast against the build-in frame (see fig. 1.1 B).
Keep a minimum margin of 3 mm between chimney breast and the appliance in
connection with the expansion of the appliance.

The depth of the recess has no influence on the removal of the glass.
4.9 Frameless with optional decorative sheet

Construct the false chimney breast around against the build-in frame (see fig. 1.1
B) apart from the lower half. Keep a minimum margin of 3 mm between chimney
breast and the appliance in connection with the expansion of the hearth.

The height of the lower half should correspond with the height of the groove(see fig
1.5 )

Place the decorative sheet on top the build-in frame.
5 removing the glass
5.1 removing the glass in front

Remove the cover strips A on the side. (see fig.2.1)

Remove cover strip B on the bottom. (see fig. 2.2 )

Place the suction discs onto the glass

Remove the sealing cord from the groove (see fig. 2.3 )

Slide the glass to the side and upwards so that the bottom edge is released from
the groove. Now gradually move the glass outwards and downwards. (see fig. 2.4 )
5.2 removing the glass on the side
It is not necessary to take out the glass on the side for placing the artificial logs or for
maintenance purposes.