FAAC N1D AUTO KIT, Руководство пользователя

Страница: 29 / 34

ND1 29 732558 - Rev. D
OFF
230 V ~
L
230 V ~
L
OFF
ON
X 1
With the following procedure, the previously stored RADIO accessories are deleted from the memory. The set limit switch points are
not reset.
Disconnect the power and connect the red wire (or black) and the brown wire (if there is the step button, press it and keep it pressed).
Power the engine and wait for it to move in both directions, meaning that the memory has been completely deleted.
Disconnect the engine from the power supply again. Disconnect the red or black wire from the brown wire. (Release the button if it is
"step-by-step")
15 DELETING ALL THE RADIO ACCESSORIES IN THE RECEIVER mod.ND1 SENSO KIT
Press
Fig. 48
Fig. 49
Fig. 50
BLACK or RED
BLACK or RED
After about
10 seconds
16 DETECTING OBSTACLES mod.N1D SENSO KIT
The N1D SENSO model allows obstacles to be recognised during motion.
If an obstacle is detected while opening, it reverses to close for 1 second and then tries to open again two more times. If it cannot open,
the shutter returns to the closed position.
If an obstacle is encountered while closing, it reverses totally to open.
At the start from the opening or closing position, the automation does not consider any blocks or obstacles for about 2 seconds.