ND1
16
732558 - Rev. D
Use the level to check that the device is horizontal.
Set the supplied toothed washers in place and tighten the tie rods using a T40 Torx wrench.
Go to chapter 9.
7.5
Fixing the frame
7.4 Fixing
holes
Assemble the pieces and place them under the architrave or on the windowsill (installation on the architrave in the fi gure).
Mark the position of the holes on the frame and drill with the appropriate bit.
Place the dowels in the holes.
ATTENTION: The quality of the fastening is essential for the device to work properly. For this the dowels must be adequate for
the type of fastening material and 8x80 screws.
Fig. 21
Fig. 22
Содержание N1D AUTO KIT
Страница 1: ...N1D KIT N1D AUTO KIT N1D SENSO KIT ...