2
J275 HA 2K20
7
532270 - Rev.A
2
5
9
7
2
1
8
4
5
10
11
1
15
3
14
13
16
6
12
3
4
Tr
ansla
tion of the original instruc
tions
ENGLISH
1
Flashing LED light
2
Head
3
Oil filler plug
4
Hydraulic unit lifting handle
5
Hydraulic unit
6
Top cover
7
High position magnetic contacts (1 NC / 1 NO)
8
Sliding guides
9
Frame
10
Low position mechanical stops (4)
11
Low position magnetic contact (N.C.)
12
High position mechanical stops (4)
13
External junction box
14
Cylinder
15
Internal junction box
16
Head removal key
INSTALLATION ACCESSORIES (SUPPLIED SEPARATELY)
1
Subframe
2
Side module with cable routing hole (x1)
3
Cable gland
4
Side module (x7)
5
Base with water drainage holes
Pit
3.7 COMPONENT IDENTIFICATION
3.6 TECHNICAL CHARACTERISTICS
The cylinder is moved by an internal hydraulic unit. A release device, protected by a security lock, to lower the cylinder can be accessed
from the top. The thrust capacitor is pre-wired and housed in the internal junction box.
Certifications
The J275 HA 2K20 bollard is certified according to the following standards and relative performance levels:
-
PAS 68:2013 V/7500 (N2)/48/90:1.7/0.0
-
IWA 14–1:2013 V/7200 [N2A]/48/90:1.9
Optional equipment
-
Emergency lowering device: a solenoid valve connected to the mains power supply allows the cylinder to be lowered automatically in
the event of a power failure.
-
Obstacle detection device: allows the closing movement to be reversed if an obstacle (e.g. a vehicle) is detected.
