![background image](http://html1.mh-extra.com/html/faac/j275-ha-2k20/j275-ha-2k20_translation-of-the-original-instructions_3115237005.webp)
J275 HA 2K20
5
532270 - Rev.A
Tr
ansla
tion of the original instruc
tions
ENGLISH
2. SAFETY RECOMMENDATIONS
This product is placed onto the market as “partly completed machin-
ery”, therefore it cannot be commissioned until the machine in which
it has been incorporated has been identified and declared to conform
to the Machinery Directive 2006/42/EC by the actual Manufacturer.
!
Incorrect installation and/or incorrect use of the product might cause
serious harm to people. Read and comply with all the instructions
before starting any activity on the product. Keep these instructions
for future reference.
Perform installation and other activities adhering to the sequences
provided in the instructions manual.
Always comply with all the requirements contained in the instructions
and warning tables at the beginning of the paragraphs. Always
comply with the safety recommendations.
Only the installer and/or maintenance technician is authorised to
work on the automation components. Do not modify the original
components in any way.
Close off the work site (even temporarily) and prevent access/tran-
sit. EC countries must comply with the legislation that transposes
the European Construction Site Directive 92/57/EC.
The installer is responsible for the installation/testing of the automa-
tion and for completing the Register of the system.
The installer must prove or declare to possess technical and profes-
sional proficiency to perform installation, testing and maintenance
activities according to the requirements in these instructions.
Installation activities require special work conditions to reduce to the
minimum the risks of accidents and serious damage. Furthermore,
the suitable precautions must be taken to prevent risks of injury to
persons or damage.
!
The installer must be in good physical and mental condition, aware
of and responsible for the hazards that may be generated when using
the product.
The work area must be kept tidy and must not be left unattended.
Do not wear clothes or accessories (scarves, bracelets, etc.) that may
get caught in moving parts.
Always wear the personal protective equipment recommended for the
type of activity to be carried out.
The required level of workplace lighting must be equal to at least
200 lux.
Operate CE marked machinery and equipment in compliance with
the manufacturer's instructions. Use work instruments in good
conditions.
Use the transport and lifting equipment recommended in the instruc-
tions manual.
Use safety-compliant portable ladders of adequate size, fitted with
anti-slip devices at the top and bottom, equipped with retainer hooks.
2.1 INSTALLER SAFETY
Store the product in its original packaging, in closed and dry premises,
protected from the sun and free from dust and aggressive substances.
Protect from mechanical stress. If stored for more than 3 months,
regularly check the condition of the components and the packaging.
-
Storage temperature: 5°C to 30°C.
-
Percentage of humidity: 30% to 70%.
After having dismantled the product, dispose of it in compliance with
the current waste disposal regulations.
Components and structural materials, batteries and electronic compo-
nents must not be disposed of together with household waste. They
must be taken to authorised disposal and recycling centres.
The oil must be gathered in a watertight container and given to an
authorised disposal and recycling centre. Do not mix with other
substances such as antifreeze or transmission fluids. Keep the used
oil away from sources of heat and out of the children's reach. The
fluid is not hazardous to health. In case of contact with eyes, skin or
clothing, wash and rinse the affected parts.
The technical data sheets of the fluids are available on request.
2.2 STORING THE PRODUCT
2.3 DISPOSING OF THE PRODUCT