![background image](http://html1.mh-extra.com/html/faac/950-bm/950-bm_user-manual_3110695029.webp)
43
ENGLISH
ENGLISH
950 BM AUTOMATION SYSTEM End-user guide
MANUAL OPERATION
If the door has to be activated manually due to failure of the
electrical power supply or a malfunction of the automatic unit,
proceed as follows:
Function selector
- Turn the selector to the “2” MANUAL/NIGHT position (fig.1).
- Open or close the door manually.
KP-Controller unit
- Press the button (
) to set the operating function to the manual
(fig.2-Tab.1) the relavant LED lit steadily.
RETURN TO NORMAL OPERATION
Function selector
- Turn the function selector to the “0” AUTOMATIC position (fig.1).
KP-Cpontroller unit
- Press again the Manual selection button (
) to exit the relevant
operating function and select the new operating mode (Tab.1)
using the relevant buttons (Fig.2). The function is shown by
steadily lit LED’s.
Fig. 2
POSITION "1": OPEN
When this function is selected, the door
opens and remains open.The door closure
can be controlled only activating the
Emergency command.
POSITION "0": AUTOMATIC
If this function is selected, when an internal/
external or Key command is given, the door
opens and then re-closes after the pause
time.
POSITION "2": MANUAL/NIGHT
The position “2” can be used to select two
different operating functions according to
the programming carried out on the 950 MPS
programming unit . The two functions are:
MANUAL:
The door can be opened
manually.
NIGHT:
The external command is inactive.
The door can be opened solely by activating
the Key command .
Read the end user guide carefully before using the product and
keep it in a safe place for future reference.
GENERAL SAFETY REGULATIONS
When correctly installed and used, the 950 BM automatic unit
assures a high level of safety. A few simple rules should be followed
to prevent problems from arising accidentally:
- Do not stand or allow children or adults to stand within range
of the door, especially during operation, and do not leave
objects near it.
- Do not allow children to play with the door.
- Do not deliberately obstruct movement of the door.
- Keep the “automatic door” signs efficient and clearly visible.
- In the event of a malfunction, select MANUAL OPERATION and
wait for a qualified technician to perform the necessary repair
work.
- Do not modify the components of the automatic unit.
- Do not attempt to repair the automatic unit or to perform any
operation on it. Call qualified FAAC technicians only.
- At least once every 6 months have qualified personnel check
that the automatic unit, safety devices and earth connection
are in working order.
DESCRIPTION
The 950 BM automatic unit for swing doors is a one-piece unit consisting
of an electromechanical device that allows door opening to be
controlled by means of a driving arm. The door is re-closed by a spring
system.
The operator can be installed either on the lintel or on the door structure
itself.
The stainless steel protective casing houses the electronic control unit
used to program and control the operation of the system.
The automatic unit 950 BM has a selector which can be used to
choose the operating logic shown in fig. 1. A “KP-Controller”
programming unit (fig. 2) can be installed as an alternative to the
function selector, in which case the operating functions in Tab.1
are available:
OPERATING FUNCTIONS
Selection is performed by pressing the keys on the fixed part of
the programmer - the function is indicated by the
corresponding LED lighting up.
Note: when the “Night” or “Manual” modes have been set, the
relevant selection keys must be pressed to exit the modes.
PARTIAL OPENING
MANUAL
BIDIRECTIONAL
MONODIRECTIONAL
TOTAL OPENING
AUTOMATIC
DOOR OPEN
NIGHT
Tab.1
1
0
2
Fig. 1
Содержание 950 BM
Страница 2: ...Fig 2a Fig 2b Fig 3 1 1 2 2 3 3 1 2 4 5 Fig 4 Fig 4b Fig 4a 6...
Страница 3: ...Fig 5 Fig 6...