![background image](http://html1.mh-extra.com/html/faac/950-bm/950-bm_user-manual_3110695018.webp)
32
ENGLISH
ENGLISH
10.4 . OPERATIONAL FUNCTIONS
Selection is performed by pressing the keys on the fixed part of
the programmer - the function is indicated by the
corresponding LED lighting up.
Note: when the “Night” or “Manual” modes have been set, the
relevant selection keys must be pressed to exit the modes.
MANUAL
The door is free and can be activated manually.
BI-DIRECTIONAL
Pedestrian transit is possible in both directions; the inside and
outside radars are enabled.
ONE-WAY
Pedestrian transit is possible in one direction only; the external
radar is disabled.
PARTIAL OPENING
The door opens only partially (standard: 80%)
Partial opening can be adjusted in range from 60% to 90% of
total.
TOTAL OPENING
The door opens completely.
AUTOMATIC
The door opens (partially or totally) and then re-closes after the
set pause time (standard: 2 sec.).
Pause time adjustment: form 0 to 30 sec.
DOOR OPEN
The door opens and stays open.
NIGHT
The door closes and the lock (if present) is activated. The
internal and external radars are disabled.
The Key command causes opening and closing after the night
pause time elapses (standard: 7 sec).
Adjusting range of night pause time: from 0 to 30 sec.
To obtain partial opening in this mode, before selecting the
“Night” function, activate the “Partial Opening” function.
10.5 . SPECIAL FUNCTIONS
SETUP
Setup is the door initialisation function during which parameters
are self-learned.
To activate, simultaneously press keys
and E for
sec.
RESET
Reset is the function for restoring normal operating conditions
after some types of alarm have been signalled.
To activate, simultaneously press keys
and
.
LOCK
When active, the Lock function disables KP-Controller.
To activate and de-activate, simultaneously press keys
and
for 5 sec.
10.6 . INSERTING AND CHANGING BATTERY
To keep the clock inside KP-Controller active even in the event
of a power cut, a 3V model CR1216 lithium battery has to be
installed.
To insert or change the battery, find the compartment on the
printed circuit (Fig. 27) and observe the indicated polarity.
Fig. 27
Fig. 26
MANUAL
BI-DIRECTIONAL
ONE-WAY
PARTIAL OPENING
TOTAL OPENING
AUTOMATIC
DOOR OPEN
NIGHT
Содержание 950 BM
Страница 2: ...Fig 2a Fig 2b Fig 3 1 1 2 2 3 3 1 2 4 5 Fig 4 Fig 4b Fig 4a 6...
Страница 3: ...Fig 5 Fig 6...