F5 ARX-500, Руководство по установке оборудования

Страница: 39 / 62

Booting the Switch
ARX-500 Hardware Installation Guide 3 - 9
If the failed switch was a member of a RON, you can enter the show ron
command from any other RON member. The output from this command
shows the UUID even if the chassis is no longer online.
In the following example, the show ron command (run on another switch in
the RON) shows the UUID for a failed chassis, provA . Again, the UUID is
bolded.
bstnA# show ron
Switch Name HA Peer Switch Uptime
Status UUID Management Addr
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
bstnA (None) 0 days, 02:07:57
ONLINE d9bdece8 ‐ 9866 ‐ 11d8 ‐ 91e3 ‐ f48e42637d58 10.1.1.7
gffstnA (None) 0 days, 01:59:42
ONLINE e5d870ae ‐ 571e ‐ 1352 ‐ 916b ‐ ef324fbc05a2 10.1.49.60
minturnA (None) 0 days, 02:00:16
ONLINE 3d17e8ce ‐ 571e ‐ 11dc ‐ 9852 ‐ ef323fbb290f 10.1.27.69
provA (None) 0 days, 02:08:11
OFFLINE db922942 ‐ 876f ‐ 11d8 ‐ 9110 ‐ 8dtu78fc8329 10.1.38.19
prtlndA prtlndB 0 days, 02:07:59
ONLINE 876616f6 ‐ 79ac ‐ 11d8 ‐ 946f ‐ 958fcb4e6e35 10.1.23.11
prtlndB prtlndA 0 days, 00:18:55
ONLINE 64dcab94 ‐ a2b6 ‐ 11d8 ‐ 9d25 ‐ bf2c991c83f9 10.1.23.12
bstnA# ...
Applying the UUID
As shown in the preceding example, the initial-boot script has a prompt for
the UUID. Enter the UUID of the replaced switch at this prompt as in the
following example.
...
11.
Enter the switch's UUID
in the format
xxxxxxxx ‐ xxxx ‐ xxxx ‐ xxxx ‐ xxxxxxxxxxxx.(default=d7270d56 ‐ 9e39 ‐ 11d8 ‐ 83e1
‐ a21e0cbcc384) # db922942 ‐ 876f ‐ 11d8 ‐ 9110 ‐ 8dtu78fc8329
...
Important
No two running chassis should ever share the same UUID. Enter the UUID
only in a switch-replacement scenario.