F5 ARX-500, Руководство по установке оборудования

Страница: 55 / 62

Front Panel LEDs
ARX-500 Hardware Installation Guide 4 - 5
NVR:
NVR Battery ECC State NVR Size (MB)
‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐
Good No Error 128
Front Panel LEDs
This section describes the ARX-500 LEDs located on the far right side of
the control panel.
LEDs on the front control panel include the LEDs shown in the following
figure, matched with the list of LEDs following the diagram.
Figure 4.1 ARX-500 Front Panel LEDs
a) OOB management (NIC2) LED . Continuous green light
indicates a link between the system and the management network
to which it is connected. Blinking green light indicates network
activity.
b) NIC1 LED . Not supported.
c) Power LED . Continuous green light indicates the system has
power applied to it. No light indicates the power is off.
d) Hard drive activity LED . Random blinking green light indicates
hard-disk activity (IDE). The hard disk is used by
system-management processes such as the CLI and GUI. No light
indicates no hard disk drive activity.
e) System Fault LED . Solid green indicates normal operation.
Blinking green indicates degraded performance. Solid yellow
indicates a critical or non-recoverable condition. Blinking yellow
indicates a non-critical condition. No light indicates POST is
running or the system is off.
a b c d e f