©
7
MICROSWITCHES
On the lower left corner of CPU board is located 8 microswitches. They are used for entry
into the different menus (test, setting up the parameters ...). They have two positions, ON
or OFF. In the ON position microswitch is activated, and in the OFF position deactivated.
To enter one of the following menus you must turn off and on dart machine.
Microswitch position:
No 1. Test menu
No 2. Bull’s
Eye value
No 3. Attract
No 4. Main (security) bookkeeping
No 5. Secondary (customer) bookkeeping
No 6. External view of secondary (customer) bookkeeping
No 7. Factory Set Up
No 8. Set up
1. Test menu
In the Test menu we can test the functionality of devices, peripheral units and individual
segments. When we activate Test menu (microswitch no. 1 in ON position, turn off and
on the machine) on the display appears "test target" and Players, Hi Score, Scram and
Double Out button lamps start wink. With that winking lamp buttons you can move through
menus. Double Out button is for open or close submenus. Hi Score button is for moving
forward and Scram button to moving backward through menus. Players button is used in
some submenus.
We have a 6 submenu in the Test menu:
a) test target
b) test lights
c) test buttons
d) test infrared
e) test sensor of missed darts
f) test credits
a) test target
When we activate Test menu
(microswitch no. 1 in ON position, turn
off and on the machine) on the display
appears "
test target
". To enter in test
mode we must press the Double Out
button. In this sub-menu we test the
validity of the connections between
target segments and target membrane switches. When we press on certain segments of a
target on display "dart" numbers 1,2 and 3 indicates that there is a segment hit single,
double or treble, while the exact number of segments seen on the "round" display. After
we finished target testing by pressing a Double Out button we get out from this submenu.
Fig. 1