©
5
INSPECTION AND MAINTENANCE OF DART
Fig
.
3 View of the dart interior
In fig. 3 you can see dart interior. Maintenance and cleaning dart targets and replacement
of any electronic parts (CPU, display and peripheral units) is very simple. When you must
replace parts, after unconnected parts from electric wiring there is no possibility to change
any connectors when you connect parts together again.
Disassembly and maintenance of target
After several thousand games, broken dart peaks fill segments of target, so the darts will
not stick in the target. Then it is necessary to clear your target. Peaks should be removed
with pliers and those which can not extract with pliers you should prowl in the internal side
of target segment and pick them after you disassemble the target.
Instructions for disassembling target:
1. Switch off power supply, open the upper doors and disconnect target switch membrane
(Fig. 3);
2. Unwind 4 nuts (like 3) and pull out whole target;
coin mechanism
WARNING:
Carelessly and unadvisedly handling with target and its parts can cause
damage to the target or its parts. For surely disassemble targets follow a step-by-step
instructions below.
CPU
target switch
membrane
nut for the target
speaker
power supply
counter
sensor for missed darts
wooden back part
of target
