manualshive.com logo in svg

EZ Digital DS-1000 Series, Руководство по эксплуатации

Поделиться
Скачать
EZ Digital DS-1000 Series Скачать руководство пользователя страница 56

2-2-12 HARDCOPY

HARDCOPY (Need Interface Card) 

Push the HARDCOPY button to print a 
hard copy of the display. The hardcopy 
function requires that an interface card 
with Centronics or RS-232C be installed 
and connected to a printer.
Refer to the manual supplied with your 
interface card  for instructions on 
connecting and using the interface card.

To use Hardcopy, the instrument needs to be set appropriately.  The setting 
can be adjusted under "Options" in the "Utility"menu. Detailed information 
about setting the menu can be referred to "NOTES TO USERS".

Hardcopy supports 3 types: BMP, Centronics, Thermal.

BMP - BMP type is enabled only when used to interface with the PC. To use 
           BMP as a Hardcopy, required are additional programs that enables the 
           PC to receive and save the BMP format.  Using EZ Digital's Softview 
           will facilitate saving in the BMP format with ease and convenience.
           RS232C and USB are both supported, but USB is faster in saving.
           Softview operates under Windows 98/2000.

Centronics - Centronics type is needed to send the screen data to a printer 
          directly. Centronics type supports HP's PCL level 3 Deskjet and Laserjet 
          printers in general. Even if the brand differs, if the printer has a mode 
          compatible with the PCL level 3 or lower, it's possible to use. Most 
          printers support this format. However, printers that provide the PCL
          format only through software on PCs and the HP 700 printer series are 
          not supported.  Concerning detailed information for PCL format  
          availability, refer to the printer user's manual or visit the printer maker's
          homepage

 Thermal -  Thermal type is enabled only by using SANEI's Printy2
          thermal printer that supports RS-232C interface.

55

Содержание DS-1000 Series




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды