manualshive.com logo in svg

EZ Digital DS-1000 Series, Руководство по эксплуатации

Поделиться
Скачать
EZ Digital DS-1000 Series Скачать руководство пользователя страница 14

This instrument should never be placed in a built-in installation such as a 

bookcase or rack unless proper ventilation is provided. Ideal ambient 

temperature and relative humidity for storing the instrument are 23

 and 60%

1-2-7 CLEANING AND MAINTENANCE

Maintenance routines performable by the operator are listed in this section. 

More advanced routines (i.e., procedures involving repairs or adjustments 

within the instrument) should be referred to service personnel.

If the outside of the case becomes dirty or stained, carefully wipe the surface 

with a cloth moistened with detergent, then wipe the cleaned surface with a 

dry cloth. In case of severe stain, try cleaning with a cloth moistened with 

alcohol. Do not use powerful hydrocarbons such as benzene or paint thinner.

Dust and/or smudges can be removed from the LCD screen. First remove the 

front case and filter. Clean the filter (and the LCD face, if necessary) by wiping 

carefully with a soft cloth or commercial wiping tissue moistened with a mild 

cleaning agent. Take care not to scratch them. Do not use abrasive cleanser 

or strong solvents. Let the cleaned parts dry thoroughly before reinstalling 

the filter and front case. If it is installed wet, dew may form and blur the 

waveforms. Be particularly careful not to get fingerprints on the filter or LCD 

face.

      Cleaning

MENU

MENU

Maintenance

13

Содержание DS-1000 Series




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды