manualshive.com logo in svg

EZ Digital DS-1000 Series, Руководство по эксплуатации

Поделиться
Скачать
EZ Digital DS-1000 Series Скачать руководство пользователя страница 45

Rising Time :

 This displays a rising time of currently displayed waveforms.

When range of input signal is out of the ADC input range, peak to peak value is 

less than 2 division, or width of 1 cycle is less than 0.4 division on display, "?" is 

displayed. when 1 cycle is not captured, "invalid" is displayed.

Falling Time :

 This displays a falling time of currently displayed waveforms. 

When range of input signal is out of the ADC input range, peak to peak value is 

less than 2 division, or width of 1 cycle is less than 0.4 division on display, "?" is 

displayed. When 1 cycle is not captured, "Invalid" is displayed.

Period 

 

:

 This displays a period of 1cycle of currently displayed waveforms.

 When range of input signal is out of the ADC input range, peak to peak value is 

less than 2 division, or width of 1 cycle is less than 0.4 division on display. 

When 1 cycle is not captured, "Invalid" is displayed.

+ Width

 

:

 This displays a positive width of 1 cycle of currently displayed 

waveforms. When range of input signal is out of the ADC input range, peak to 

peak value is less than 2 division, or width of 1 cycle is less than 0.4 division on

display, "?" is displayed. When 1 cycle is not captured, "Invalid" is displayed.

- Width

 

 

:

 This displays a negative width of 1 cycle of currently displayed 

waveforms of channel. When range of input signal is out of the ADC input range, 

peak to peak value is less than 2 division, or width of 1 cycle is not captured, 

"Invalid" is displayed.

Duty   

  

:

 This displays a duty ratio of 1 cycle of currently displayed waveforms 

of channel. When range of input signal is out of the ADC input range, peak to 

peak value is less than 2 division, or width of 1 cycle is less than 0.4 division on 

display, "?" is displayed. When 1 cycle is not captured, "Invalid" is displayed.

44

Содержание DS-1000 Series




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды