CH1 :
Input signal of CH1 is used as trigger source.
CH2 :
Input signal of CH2 is used as trigger source.
EXT :
When trigger is operated with signals from external clock or other parts
of the circuit, or in case an auxiliary trigger is used, connect the external
trigger signal to the EXT terminal.
LINE :
The LINE trigger source uses the line voltage signal as the trigger source.
With this function, Trigger is able to be
selected from the source such as CH1,
CH2, EXT or LINE
.
The channel which is
selected as trigger source performs a
function of trigger source without
connections with display. After the display
of "mode setting",source setting is
displayed on screen.
SOURCE
This function automatically sets a trigger
source signal within the 50% of trigger
level range. When trigger coupling is AC
or LF Reject, the 50% of trigger level is set
at the center of GRID vertical axis. When
trigger coupling is DC or HF Reject, it is set
at the 50% of trigger source signal
amplitude.
SET LEVEL TO 50%
41
Содержание DS-1000 Series
