6
ASSEMBLY – CLASS II RECIEVER ATTACHMENT
WARNING!:
Failure to properly tighten bolts and insert pins where required may cause assembly failure, serious injury or death.
Always check that all bolts are securely fastened and pins are locked in place before use of the product.
Class II
1.)
Place the collar on the 3/8 Hex Head Bolt
2.)
Insert the Receiver Attachment Connector into the receiver hitch.
3.)
Slide the Receiver Attachment into the hitch receiver on the vehicle and align the holes between the two. (Note:
It is recommended that you align the holes to the second hole on the arm).
4.)
Place the washer over the threaded end of the bolt and screw the nut onto the bolt.
5.)
Using a 9/16 wrench and socket wrench, tighten the nut and bolt with a wrench until the Attachment is securely
fastened to the receiver hitch. Unscrew the spring nut from the bolt.
