7
ASSEMBLY – CLASS III RECIEVER ATTACHMENT
WARNING!:
Failure to properly tighten bolts and insert pins where required may cause assembly failure, serious injury or death.
Always check that all bolts are securely fastened and pins are locked in place before use of the product.
Class III – SEE FIGURE 2
1.)
Remove the cotter pin from the Silent Hitch Pin™.
2.)
Unscrew the spring nut from the pin.
3.)
Insert the spring nut into the shank tube of the Receiver Attachment. Align the spring and threads on the
spring nut with the shank tube holes (Note: It is recommended that you align the spring nut to the second
hole on the arm).
4.)
Slide the Receiver Attachment into the hitch receiver on the vehicle
5.)
and align the holes between the two.
6.)
Insert the pin, split locking washer and washer into the spring nut and screw tight. Using a 7/8 wrench or
socket, the pin should be tightened between 30 and 60 ft-lb of torque (e.g., similar to tightening a lug nut on
a car wheel).
7.)
Remove the cap from the lock and use the provided keys to secure the lock onto the pin. Pull on the lock to
check that it is securely fastened.
8.)
Replace the cap on the lock to protect the internal mechanism in the lock from the elements when not in
use.
ASSEMBLY –
ATTACHING
